What is tile interface agent
Interface agent is a kind of adhesive, generally used on the surface of concrete. Due to the overly smooth surface of the bottom layer of the wall, we naturally worry that the tiles will fall off when pasting them. Using tile interface agent can make the bottom surface of the wall rough, increase its bonding strength, and prevent the plastering layer from hollowing out and bulging.
The tile interface agent has the functions of permeability, adhesion, water resistance, breathability and weather resistance. It can form a network system between the bottom layers, solving the quality problems such as hollowing and falling between the faults. It is applicable to concrete, aerated concrete, small blocks, lightweight partition walls, brick-concrete walls, putty application, tile bonding, brick and stone back coating and insulation boards, etc
Low-level interface preprocessing.
The function of tile interface agent
It can enhance the adhesion between tiles and walls (such as concrete walls, brick walls, ground slab walls, etc.), playing the role of a "bridge frame".
- Prevent hollowing and peeling of the cement mortar leveling layer, and save the cost of manual and mechanical roughening.
- When used in combination with tile adhesive, it makes the tiles more secure.
Tile interface agent process
Interface agent is a kind of adhesive, a high-molecular polymer made of ethylene and vinyl acetate, which has extremely strong bonding force. The material itself does not absorb water and has excellent water resistance and moisture-proof properties. In decoration applications, enhancing the bonding strength of mortar to the base layer of glazed tiles can effectively prevent hollowing and falling off of glazed tiles when they are applied to the wall. Apply an interface agent to the back of the vitrified tile or non-absorbent material. After it dries (at room temperature, it takes more than 2 hours; in cold weather, the drying time is longer), then stick it normally with cement or tile adhesive.
What is tile adhesive
Tile adhesive, also known as ceramic tile bonding agent, adhesive mud and other names, is a new type of material in modern decoration. It has replaced traditional cement and yellow sand. The bonding force of the adhesive is several times that of cement mortar and can effectively bond large tiles and stones, avoiding the risk of tiles falling off.
Tile adhesive has good flexibility and can prevent hollowing during production. It is mainly used for pasting ceramic tiles, facing bricks, floor tiles and other decorative materials, and is widely applicable to the surface decoration places of interior and exterior walls, floors, bathrooms, kitchens and other buildings. Its main features are high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction. It is a very ideal bonding material.
What are the differences between tile interface agent and tile adhesive
- The application objects are different
Tile adhesive is used for bonding materials such as tiles and floor tiles. Interface agents are applied to the surfaces of materials such as concrete, ash-sand bricks, and fly ash bricks.
- Different functions
Tile adhesive can be used as a filling material for walls, and it can also be formulated into cement mortar to stick tiles, floor tiles, and even as an adhesive for wall fabric and wallpaper. And the interface agent is
It is used to enhance the adhesion at the interface between cement and repair mortar, reduce the water absorption rate of the base surface, and solve some wall problems.
When used in combination for tiling, the strength will be higher.
